ZHANGFA HYDRAULIC PARTS CO.,LTD

进入中文版 ENGLISH
News

On the difference between high pressure gear pump and ordinary gear pump, Hydromax gear pump

Author:FAZHAN Date:5/10/2019 6:27:19 PM
On the difference between high pressure gear pump and ordinary gear pump, Hydromax gear pump

1. The body and cover surface of the high-pressure hydraulic gear pump, there is no paper pad to adjust the clearance between the surface and the surface, and the seal is excellent. Gear end clearance are all parts of the size and appearance of precision to ensure that the pump seal using a multi-stage combined sealing system, pump shaft end is very low oil leakage machine
 
2. High pressure gear pump appearance is beautiful belongs to the shape of easy processing, its appearance is the use of rectangular five-piece combination.
 
3. The noise of high pressure gear pump is low, and the noise value at the maximum load can reach the product standard level A (common gear pump is generally in level B, C).
 
4. High pressure gear pump rotary parts are made of special alloy materials, in general, strong anti-impurity ability is not easy to wear.
 
5. High pressure gear pump volume efficiency up to 95%, belongs to the energy-saving products (general pump in 50% to 80%).
 
6. High pressure gear pump can work at low speed (125r/min) under constant pressure, volume efficiency can still reach more than 85%, which is the ordinary precision of the gear pump can not reach.
Gear pump rotary parts are made of special alloy materials, in general, strong anti-impurity ability is not easy to wear.
 
7 suction Yang cheng up to 8m, belongs to the high suction gear pump. In the case of type test, the pump can still work normally when the oil inlet of the pump is -0.085mpa.

The above: Hydraulic gear pump in the role of the hydraulic system 
 

online service

Skype: zfhydraulic